Adding a Yubikey Authenticator

As of AuthAnvil On-Demand release 2017H Authenticator support is now available for HOTP for Standard / Neo / Yubikey 4. (AAOD was the previous brand name for Passly) 

Note: This authenticator only supports generation of a one time password. If you require the use of Push you will need to refer to this article

Note: This authenticator is an x64 (64 bit) only installer.

 

Enabling a Yubikey during Enrollment

Users can choose to use a Yubikey as their authenticator option during enrollment

  1. Launch the enrollment link.
  2. Select lets get started.
  3. Select Yubikey (Requires Yubikey programmer).
    1.PNG
  4. Select (download installer).
    2.PNG
  5. Once the installer is downloaded launch yubikeyprogrammer.msi
  6. Select Next.
    3.PNG
  7. Agree to the User license agreement. Select Install.
    4.PNG
  8. Select Finish.
    5.PNG
  9. Select Launch Programmer. This will open the Yubikey Programmer on your local machine.
    7.PNG
  10. Select Yes once you verify that the Yubikey is not already assigned to a user.
    8.PNG
  11. Select OK.
    9.PNG

  12. Select the field for "Enter your One-Time Password". Tap the button your Yubikey (Ensure that the Yubikey is inserted in an open USB port).
    10.PNG
  13. Select Verify & Save.
  14. Select "Nice, Let's Move On".
    11.PNG

 

Replacing an existing authenticator with a Yubikey

  1. Log in to your Passly tenant https://(your tenant).my.Passly.com
  2. Select your user icon in the top right corner.
  3. Select My Profile.
  4. Under Multi-factor Authentication select Manage Token.
  5. Select Yubikey (Requires Yubikey programmer)
    1.PNG
  6. Select (download installer).
    2.PNG
  7. Once the installer is downloaded launch yubikeyprogrammer.msi
  8. Select Next.
    3.PNG
  9. Agree to the User license agreement. Select Install.
    4.PNG
  10. Select Finish.
    5.PNG
  11. Select Launch Programmer. This will open the Yubikey Programmer on your local machine.
    7.PNG
  12. Select Yes once you verify that the Yubikey is not already assigned to a user.
    8.PNG
  13. Select OK.
    9.PNG

  14. Select the field for "Enter your One-Time Password". Tap the button your Yubikey (Ensure that the Yubikey is inserted in an open USB port).
    10.PNG
  15. Select Verify & Save.
  16. Select "Nice, Let's Move On".
    11.PNG
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact us